XY690A Phenyl Glycidyl Ether CAS 122 60 1 C6H5OCH2 CHCH2 O MF 96%
Phenyl Glycidyl Ether
Chemical name: phenyl glycidyl ether
Molecular formula: C9H10O2
Structural Formula: C6H5OCH2(CHCH2)O
CAS Number: 122-60-1
Physical and Chemical Character: colorless transparent liquid, no
low toxic, low volatility
Appearance: Colorless transparent liquid
Containing phene ring, ether key and epoxy group, compared with
Butyl glycidyl ether (XY501 diluent), which can eliminate the bad
effect from heat when curing, good heat-resistance and
2. Technical Data Sheet
-XY690 can be discretionarily combined with epoxy resin in
proportion because of it’s low viscosity (only about 0.007 Pa.s)
-To be used as epoxy resin active diluents, modified
m-phenylenediamine curing agent material, and in non-solvent
unticorrosion coating, winding-forming.
Dosage: in general, XY690 should be 10-15% of epoxy resin in
weight, XY690 contains epoxy group which can neutralize curing
agent, so it is necessary to add the quantity of curing agent in
course of using.
- Packed in 20 kg/barrel or 200 kg/barrel or 1000kgs/ IBC container
- Storage and transportation must conform to basic requirements of
- Store in a cool, dry and well-ventilated area. Keep away from
ignition sources, heat and flame and sunlight.
- It is necessary to maintain insulated (tightly seal) after use,
in order to avoid negative influence arousing from moisture
5. Please note that all information provided by XYCC is considered
accurate in certain condition. However we will not promise or bear
any legal responsibility due to factors in producing and processing
products. The customer should test applicability of our products
fully before using it.